Helical Screw Pile – 500mm x 64mm
PRODUCT CODE: QUADRAPILE64X500
A single 500mm long section of QuadraPile aluminium alloy helical pile.
QuadraPile is suitable for use as foundations for various structures:
- Garden rooms
As well as for holding down structures such as marquees.
Each section of 64mm QuadraPile has an M12 threaded hole in one end and an M12 stud cast into the other end. This allows sections to be joined together as they are driven into the ground in order to form the length of pile required.
The section of pile can be driven using a normal road breaker with the QuadraPile driving adaptor and head protector washer.
Each 64mm pile shouldn’t be used or tested for loads exceeding 50kN (5T). Adjust the pile spacing to below this limit. The actual load achieved will depend on the ground conditions and depth of the pile. Our 100mm QuadraPile can be used for higher loads but the installation equipment required is more extensive – please contact us for more details.
If you’re new to the QuadraPile system, please feel free to contact us to discuss your requirements.
For more information on the QuadraPile system, visit our QuadraPile page.